GR5630-SB3+ (4bay 2.5"-3.5" RAID Storage Solution)
Embedded the latest interface USB3.0, GR5630 delivers the fastest data transfer rate in performance.
Two host interfaces of Super-speed USB3.0/eSATA
GR5630-SB3+ offers two host interfaces of Super-speed USB3.0/eSATA and the equipped LCM enables the convenience of configuration for a desired RAID level among JBOD / RAID 5 / RAID 0 by fully taking the advantage from the larg- est supporting capacity up to 40TB . GR5630 is not only giving a big storage capacity , but delivering data security and performance to various applications and environments.
Suitable for PC and Mac user
With USB3.0 / eSATA host inter- faces, GR5630 can be used both in PC and MAC environment flexible.
Use S2F product extends All Your Storage Products
GR5630-SB3+ and S2F combination eSATA and FireWire 800 interface extends your storage,From your only Firewire Mac to connect to Non-FireWire device, S2F provides you a great flexibility to choose a good storage product from Raidon. And also, S2F could not only connect to one Non-FireWire Raidon storage product but one more storage thru a second FireWire 800 port.
(S2F only for RAID mode and a single hard drive in JBOD mode)
More S2F product information >>>>
Removable design, use multiple hard drives flexibly
The GR5630-SB3+ is a quadruple drive storage enclosure system that supports the latest 3.5" and 2.5" SATA hard drives to deliver high- capacity data storage solutions. Featuring flawless structural design, optimized internal configuration, and a durable aluminum casing to protect your internal drives, the GR5630-SB3+ is perfect for creative and highly mobile professionals.
Setting via LCM with ease!
Users can set up GR5630-SB3+ via the LCM and buttons on the front panel while clearly knowing the real-time status of GR5630-SB3+ from the LCM.
Full 200 watts and stable power supply
GR5630-SB3+ uses a full 200 watts and stable power supply. As the capacity of single HDD reaches 8TB, the power con- sumption of it also comes with higher requirement. By using this power supply, users can be worriless about GR5630 for not working properly or unable to boot the HDD causing by lack of wattage.
3mm thick Aluminum housing
With 3mm thick Aluminum housing design, not only effectively assisting heat dissipation, but also provides a better physical protection from outer forces, even if moving GR5630 with four HDD installed there will be no concerns of excessive weight causing exterior deformation.
GR5630-SB3+ Product View
|RAID chip||JM539 + JMB393|
|Drive Fit||3.5” SATA II HDD x 4|
|RAID Level||RAID 0, 1, 5, JBOD|
|Hot-Swap||RAID 1, 5|
|Auto Rebuilding||RAID 1, 5|
|Host Interface||USB 3.0 & eSATA Connector|
|Power Supply||AC Input : 100V ~ 240V|
|HDD Access Indicator||LED|
|Cooling Fan||8cm Fan|
|Environment Detector||Fan Failure / Overheat|
|Dimensions||125W x 212L x 168H(mm)|
|Certifications||CE & FCC|
|Windows, Linux, Mac
|GUI (Windows Only)|
||USB3.0 Cable、eSATA Cable、Power Cable、CD
Quick Installation Guide、Accessory Kit
|50° to 95° F (10° to 35° C)
-4° to 116° F (-20° to 47° C)
5% to 95% noncondensing