Products
 
 
 
 
 

 

 

 

 

 
Home Contact Us
           
HOME > Products > RAIDON > IntraTANK Series
Products
 
SL5650-4S-L4D    

SL5650-4S-L4D iSCSI storage is ideal for the growing business looking for expandable

and secure storage for its increasing data. Coming with 4 bay standard tower design allows you to build up 8 bay storage through connecting another RAIDON storage with its infiniband port. Meanwhile, SL5650 iSCSI storage supports RAID 6 which enables to recover from the simultaneous failure of two drives in the enclosure.

Furthermore, 2 Gigabit Ethernet LAN ports are equipped to support remote data backup allowing data recovery be handled offstie and 1 LAN port for GUI management.

  
 
     
Product FeaturesInterface
     
  ■ Dual channels + 1 x infiniBand Port for expansion
   

To use dual Gigabit Ethernet interface from SL5650 iSCSI storage, it is not only to suit your Internet structure but also provide the highest transfer rate up to 200MB/s. The featured infiniBand port design can expand your storage to a 4+4 bay storage with RAIDON ST7610-4S-U5!
  ■ Doubling capacity, security upgradeable (8 bays RAID)
    Embedded with an 8 channels RAID controller inside which supports RAID level 0,1,0+1,3,5,6,10,30,50,60,JBOD. The SL5650 iSCSI storage unit not only provides 4 x SATA hard drive trays only, but is able to connect with another JBOD device by 4 x eSATA ports,then the system is going to turn into an 8 bays RAID subsystem. The featured design enables you no longer to worry about the storage capacity and security when your data increases rapidly, it even helps to save at least 1/2 purchasing cost!
  ■ Web-based interface, easy to operate
    SL5650/SL7650 iSCSI storage allow you to set the RAID Level / H/W parameter and inspect the H/W status by Management UI through the WEB and Serial Port (RS-232) connection. A big disk space as be created for the server via iSCSI solution, it enables you to control the storage space more efficient and easily from server end.
  ■ Online data auto-rebuilding
    This iSCSI storage system will auto-rebuild the data by Hot-Spare or parity check after the HDD exchanged; it doesn't need any commend or shut down the operating system.
  ■ INITIATOR software supports varies O.S platform ( Windows / Mac / Linux )
    It enables you to link and use the iSCSI storage directly via this software or HBA card by choosing to install the free Initiator software which be downloaded from Internet or use iSCSI HBA card.
  ■ LCD displays system status & IP address
     

 

 

 

 

 

 

 

 

本頁產生總共花了:0.2338330745697 秒