GR5640-SB3 (4bay 2.5"-3.5" RAID Storage Solution)
Embedded the latest interface USB 3.1 Gen 1/ eSATA, GR5640 delivers the fastest data transfer rate in performance.
Multiple host interfaces of Super-speed USB 3.1 Gen 1/eSATA
GR5640-SB3 offers multiple host interfaces of Super-speed USB 3.1 Gen 1/eSATA and the equipped LCM enables the convenience of configuration for a desired RAID level among JBOD / RAID 5 / RAID 0 by fully taking the advantage from the larg- est supporting capacity up to 40TB above. GR5640 is not only giving a big storage capacity , but delivering data security and performance to various applications and environments.
RAID 5 for data safety & RAID 0 for high-speed performance
With RAID 5, a user will have the maximum protection of his/her data with allowance for a single drive failure but yet all data will be kept intact. In the RAID 0 mode, a user will have the benefit of a single massive volume for storage with high I/O speed, with sets of data being striped across the four enclosed drives.
Suitable for PC and Mac user
With USB 3.1 Gen 1/ eSATA host inter- faces, GR5640 can be used both in PC and MAC environment flexible.
Removable design, use multiple hard drives flexibly
The GR5640-SB3 is a quadruple drive storage enclosure system that supports the latest 3.5" and 2.5" SATA hard drives to deliver high- capacity data storage solutions. Featuring flawless structural design, optimized internal configuration, and a durable aluminum casing to protect your internal drives, the GR5640-SB3 is perfect for creative and highly mobile professionals.
Setting via LCM with ease!
Users can set up GR5640-SB3 via the LCM and buttons on the front panel while clearly knowing the real-time status of GR5640-SB3 from the LCM.
With thick Aluminum housing design, not only effectively assisting heat dissipation, but also provides a better physical protection from outer forces, even if moving GR5640-SB3 with four HDD installed there will be no concerns of excessive weight causing exterior deformation.
MCU feature to provide you in-chassis temperature control
GR5640-SB3 is also designed with the MCU feature which monitors and helps improving its in-chassis system temperature. While the system temperature rises up to 50 degree-C (122 degree-F), MCU will bump up the fans with full speed; and once system temperature goes up to 55 degree-C (131 degree-F), the buzzer will alert. And you could manually adjust fan switch on the rear, MCU would reduce the fan speed down to SMART speed for a better green user environment from a less fan noise and lower power consumption.
In addition, if the fan fails or the device temperature is too high, the buzzer will beep and let the user know that the device has failed. The user can turn off or turn on the buzzer through the mute adjustment switch on the back panel.
GR5640-SB3 Product View
|RAID chip||JMS578 + JMB394|
|Drive Fit||4 x 3.5"/2.5" SATA III HDD/SSD ( up to 6 Gbps )|
|RAID Level||RAID 0, 5, JBOD|
|Auto Rebuilding||RAID 5|
|Host Interface||USB 3.1 Gen 1 & eSATA Connector|
|Power Supply||AC Input : 100V ~ 240V|
|HDD Access Indicator||LED|
|Cooling Fan||8cm Fan|
|Environment Detector||Fan Failure / Overheat|
|Dimensions (WxHxD)||125x168x212 mm|
|Certifications||CE & FCC|
|Windows, Mac, Linux
|GUI (Windows Only)|
||GR5640-SB3、USB 3.1 Gen 1 Cable、eSATA Cable、Power Cable、
Quick Installation Guide、Accessory Kit
|32° to 104° F (0° to 40° C)
-4° to 116° F (-20° to 47° C)
5% to 95% noncondensing
|GR5640-SB3||Image Download||Firmware & RAID Manager download (Improve stability for RAID rebuilding function)|
|Product Name||Brand||HD Type||HD Category||Model Number||Capacity||Note|
|GR5640-SB3||WD||3.5" HDD||RE3 Enterprise WD1002FBYS||1TB|
|GR5640-SB3||WD||3.5" HDD||AV-GP HDD-WD15EVDS||1.5TB|
|GR5640-SB3||WD||3.5" HDD||RE4 Enterprise-WD1503FYYS||1.5TB|
|GR5640-SB3||WD||3.5" HDD||RE4 Enterprise-WD2003FYYS||2TB|
|GR5640-SB3||WD||3.5" HDD||RED NAS HDD-WD40EFRX||4TB|
|GR5640-SB3||WD||3.5" HDD||RED NAS HDD-WD60EFRX||6TB|
|GR5640-SB3||Seagate||3.5" HDD||IronWolf (NAS)||ST10000VN0004||10TB|
|GR5640-SB3||Seagate||3.5" HDD||IronWolf Pro (NAS)||ST10000NE0004||10TB|
|GR5640-SB3||Seagate||3.5" HDD||IronWolf (NAS)||ST12000VN0007||12TB|
|GR5640-SB3||Seagate||3.5" HDD||IronWolf Pro NAS||ST10000NE008||10TB|
|GR5640-SB3||Seagate||3.5" HDD||Exos X14||ST14000NM0428||14TB|
|GR5640-SB3||WD||3.5" HDD||Red||WD100EFAX||10TB||Connecting USB 2.0 host interface;performance about 4-6 MB/s.|